Follett HCD1400R Manual do Utilizador

HCD1400R, HCD1400N IcemakersFollowing installation, please forward this manualto the appropriate operations person.Operation and Service ManualAfter S

10Fig. 812316"(407mm)Fig. 9Fig. 10 8. Disconnect coupling as shown (Fig. 8). 9. Using disposable food service grade gloves, insert dry Sani-S

11Fig. 11Fig. 12 11. Reconnect coupling. Press power switch ON. Ice pushes Sani-Sponges through tube (Fig. 11). 12. Place a sanitary (2 gallon or la

12ServiceIcemaker operation (all models)Follett’s icemaker consists of five distinct functional systems covered in detail as follows:• Water system•

13Water systemThe water level in the evaporator is controlled by a feed solenoid and level detecting sensors. Referencing the diagram below, water sen

14Electrical systemNormal control board operationThe PC board indicator lights provide all the information necessary to determine the machine’s status

15Test points:The Horizon PC board incorporates on-board test points that can be used to determine various electrical outputs. The test point holes al

1600127126R07Horizon 1000/1400 Series Split System Icemaker801 CHURCH LANE EASTON, PA 18040, USA800-523-9361 OR 610-252-7301FOR SERVICE CALL: ON THE W

14652SRCS CapHP LPR CapL2L1Crankcase heaterDual pressure controlGNDFanBlackBlackBlackBlackBlackYe l l o wRedRedFanCoilBlackContactor17Gearmotor data B

18Mechanical system Evaporator disassembly1. Press PURGE button to purge evaporator, and then turn power OFF.2. Unscrew and remove stream divider as

198. Loosen nut on V-band clamp and remove.9. Remove V-band clamp from front of evaporator.10. Remove main housing as shown.11. Remove and discard

2Follett CorporationEquipment Return PolicyFollett equipment may be returned for credit under the following conditions:1. The equipment is new and un

20Lubewith soaptouchDo notCardboard discFig. 193. Press new mating ring into main housing as shown.4. Lube the shaft with liquid soap in the area sh

21Fig. 2211. Reconnect transport tube to louvered docking assembly.12. Plug sensor in at the electrical box.13. Reconnect vent tube to the shuttle

22Fig. 2520. Remove bolt and reinstall the washer and bolt.Place retainer over bolt and secure with nut and washer.Apply petrol-gelFig. 2621. Lubric

23Refrigeration systemCondenser unit operationThe condensing unit is weatherproof and equipped to operate in ambient temperatures from – 2 0˚F – 120˚F

24filter-drierlow sideservice valvewith service porthigh sideservice valvewith service portEvaporator unitsight glassSOLENOID VALVEcondenserCondenser

25Refrigerant replacement requirements 1. Non-contaminated refrigerant removed from any Follett refrigeration system can be recycled and returned to

26“Bin full” detection systemThe Follett Horizon icemaker incorporates a unique “bin full” detection system, that consists of the shuttle and actuator

27TroubleshootingPlease see “Service” section for a description of each function.1. Ice machine is in running condition but not making ice.2. The CP

286. Ice machine is not making ice.Drain clog.7. Ice machine is making ice. Excessive water in bin or coming into bin from transport tube.8. Ice ma

29

3Welcome to Follett CorporationSpecifications Operation Cleaning, weekly exterior care Cleaning, semi-annual evaporator cleaningService Icemaker ope

30Replacement partsEvaporator assemblyOrder parts onlinewww.follettice.com8912111037283940233438413329351718183130262324252424272336322313141516131917

31Order parts onlinewww.follettice.comReference # Description Part #1 Tube, ice transport, molded 001306662 Shuttle assembly (includes 00115600 &a

3245611103281415112791316Low side assembly

33Reference # Description Part #1 Tubing, liquid line 001424142 Tubing, suction line (includes insulation) 001310453 Sight glass 001070454 El

34Electrical box12387654Order parts onlinewww.follettice.com

35Reference # Description Part #1 Cover, electrical box, remote 001308982 Board, control circuit, 120V (includes 00132910) 001329103 Stand off’

36Integration kit – top-mount and Satellite-fillOrder parts onlinewww.follettice.com8765411121112876541321102210921Top mount configurationSatellite-fi

37Reference # Description Part #1 Shuttle actuator 001713222 Clamp 5003773 Actuator elbow (includes 00167122 and 209100) 001712644 Screws 20910

38Skins assembly13 1615OZMADE INTHE USAPSIGMODELSERIAL NOCORPORATIONPART NOHZLOW SIDECHARGEVOLTSEaston PennsylvaniaModule No.Stock Module Ident

39Reference # Description Part #1 Front cover, split system 001306332 Tubing, water, 1/4" OD 5020793 Tubing, drain 001449234 Fitting, drai

4Welcome to FollettFollett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and outstanding after-the-sale

4000171603R0005/07801 Church Lane • Easton, PA 18040, USAToll free (800) 523-9361 • (610) 252-7301Fax (610) 250-0696 • www.follettice.com1254910111413

5SpecificationsElectricalSeparate circuit and equipment ground required.Evaporator unitStandard electrical – 115/60/1Maximum fuse – 15 ampsAmperage –

6Dimensions and clearancesEntire front of icemaker must be clear of obstructions/connections to allow removal.1" (26mm) clearance above icemaker

7OperationCleaning and preventive maintenance (all models)Note: Do not use bleach to sanitize or clean the icemaker.Preventive maintenancePeriodic cl

8 2. Mix 1 gallon (3.8L) 120˚F (49˚C) water and 7 ounces (198g) (one 7 ounce packet of Follett SafeCLEAN ice machine cleaner, part#-00132001). Locat

9HI WATERFig. 512Fig. 6Fig. 7 5. Mix 1 gallon 120˚F (49˚C) water and 1.6 ounces (48ml) NU-CALGON IMS-II SANITIZER. Fill until HI WATER light comes o